66
1. On an Internet-connected computer, go to the web site displayed
on the
System update
screen.
2. On the
USB Update
web page, select the correct Haier • Roku TV
model and then click
Download
. Save the file to the root folder of
a standard USB flash drive.
3. When the download finishes, take the USB flash drive to the TV
and plug it into the USB port. When you do, the TV validates the
files on the flash drive and displays a 12-digit code.
4. Write down the code and the web address, and take this
information back to your Internet-connected computer.
USB flash drive
Any normal USB flash drive will work,
provided it has a FAT-16 or FAT-32 file
system format. (This is the default for
most flash drives.)
The size of the download is small—
usually less than 100 MB—and so will
fit on any size flash drive you might
have.
5. On the
12-digit code
page, enter the code your TV displayed, and
then click
Next
.
6. On the
6-digit code
page, write down the 6-digit code that
appears, and then take it back to your TV.
7. Using the TV remote control, select
Next
to move to the next
screen, and then use the on-screen keyboard to enter the 6-digit
code. When finished, select
OK
. The system update begins. Do not
remove the USB flash drive until the TV restarts.
12- and 6-digit codes
The USB update process uses a pair
of codes to validate that you are
authorized to install an update, and
to ensure you are not attempting to
install an old, unsupported version of
the system software.
When the update finishes, the TV restarts. You can check the new version number by navigating to
Settings > System >
About
.
