TYPICAL WIRING DIAGRAMS
CAUTION
1. Be sure to disconnect the power to the control
transformer before removing or installing thermostat.
2. Do not short gas valve, fan, heat relay, or cool relay...
even momentarily. This will blow a non-replaceable
fuse.
3. Do not attempt to hook up to live circuits. An accidental
connection to a component on the thermostat circuit
board could cause damage to the thermostat.
Figure 4 -
Thermostat power-up for test or demonstration purposes
Note: As a convenience to the installer, the compressor start up
protection delay can be canceled. To cancel the delay, press the Prog
key 3 times, then press the Fan key 2 times.
6
