MOUNTING
When mounting the RC-80, grasp the thermostat by the sides,
avoiding the keys, and unsnap the base from the face.
Holding the base to the wall so that the word "TOP" is upright and
facing you:
1. Mark the two mounting holes on the wall using a pencil.
2. Drill a hole using a 3/16" bit at each mounting hole marking.
3. Install the two wall anchors supplied.
4. Slide the system wires through the opening in the base.
5. Mount the base to the wall using the two #6 x 1/2" self-tapping
screws supplied - See Figure 1.
Figure 1 -
Mounting thermostat base
3
