HAI OmniLT, Owner'S Manual

Page: 17 / 20

Page 17
Programming UPB
OmniLT can be programmed to run macros when a UPB unit changes state, the top-rocker or bottom-rocker is pressed on a UPB
Switch, when a button is pressed on a UPB 6-Button or 8-Button Keypad Controller, or when a Link is received on the UPB network.
Likewise, OmniLT can be programmed to control UPB switches (on, off, dim, brighten, and setting to a specific level), control each
LED on a UPB 6-Button or 8-Button Keypad Controller, transmit a Link onto UPB network, or request status of a unit.
Edit Programs When
Selecting the 1 (WHEN) key, from the
Edit Program menu, allows button/event activated programs to be created. The display shows:
EDIT WHEN
1=TIMED 2=BUTTON
Selecting 2 (BUTTON), from the "Edit When" menu, sets up a program to be activated when a macro button is executed or an event
occurs. The user is prompted to specify the button/event that activates the program:
BUTTON:
ENTER BUTTON #=MENU
↓
To program specific event buttons (i.e. UPB switch presses, UPB controller keypad button presses, and receive Links), press the ' # '
key to bring up a menu of event button types:
BUTTON TYPE
1=CTRL 2=SEC 3=ZONE
↓
4=ALL 5=ALARM 6=X-10
7=MISC 8=MSG
↑
Control Unit Event / UPB Switch Press Event Buttons (1=CTRL):
When a control unit or UPB Switch Module is turned on or off, or if the top-rocker or bottom-rocker is pressed on a UPB Switch
Module, or a button is pressed on a UPB 6-Button or 8-Button Keypad Controller, the "When Unit" program is activated.
Press the 1 (CTRL) key to select the "When Command" for a control unit or UPB Switch activated event. Additionally, you can
specify that the event will only activate when a button is pressed on a UPB 6-Button or 8-Button Keypad Controller.
You are first prompted to enter the desired unit number:
UNIT:
ENTER UNIT
↓
The unit may be selected by entering the unit number followed by the ' # ' key or by using the arrow keys to scroll through a list of unit
names. Select the desired unit. Next, you are prompted to specify the event that activates the program:
WHEN Porch Light:
0=OFF 1=ON 2=SWITCH
Press the 0 (OFF) key to select when the unit turns off or press the 1 (ON) key to select when the unit turns on (this program is
executed whenever the unit is turned off or on).