Hahnel modus 600rt, Instruction Manual

Page: 27 / 176

Modus 600RT 27
Advanced setting with fully automatic wireless flash
With the wireless system the following functions set on the master unit
will automatically be adjusted on the slave unit. For this reason you
do not need to operate the slave unit (s) and can operate it from the
master in the same way as normal flash photography.
• Flash Exposure Compensation <
> (Page 16)
• Flash Exposure Bracketing <
FEB
> (Page 17)
• Flash Exposure Lock (Page 17)
• High-Speed Sync < > (Page 18)
• Manual Flash (Page 19)
• Multi / Stroboscopic Flash (Page 20)
Multiple Master Unit
You can use two or more cameras with master flash units on each to
change camera shooting while keeping the same lighting setup (slave
units) in wirelesss flash photography.
• All Master / Slave devices must be reset to open channel
ETTL: Shooting Flash Ratio A:B
You can divide slave groups into two A and B groups and adjust flash
ratio. The total output of A and B will be automatically contolled to a
standard exposure.
• Second Curtain Sync - is only enabled when using the Viper TTL
Transmitter
MASTER
SLAVE
GROUP A
SLAVE
GROUP B
1. Setting the flash groups of
slave unit
• Set the flash as slave unit
• Press Function Button 3 <
Gr
> and choose <A>
or <B>
• Set one slave unit as <A>,
the other as <B>
2. Setting < MENU >
• Step 2 to Step 4 are set on
the master unit.
• Press the Function Button 4
<
MENU 1
> on the master
unit so that <
MENU 2
> is
displayed