Hague ST-200, Setup Manual

Page: 5 / 12

OR-05/18/15 Smart Touch Controller Setup Guide pg.5
Quality Water International ®
Smart Touch Controller
Iron ppm
Enter Iron test results
(0 to 99 ppm (mg/L))
“OK” to continue
Compensated
Hardness Grains
Automatically calculated
“OK” to continue
Brine/Rinse Minutes
Brine and rinse cycle duration
Preset - 030.0
(0 to 999.9)
“OK” to continue
Manganese ppm
Enter Manganese test results
(0 to 99 ppm (mg/L))
“OK” to continue
Capacity Grains
The desired capacity number
(52 to 9999 Grains) or
(788 to 6999 gm)
“OK” to continue
Backwash 2 Minutes
Second backwash cycle duration
Preset - 005.0
(0 to 999.9)
“OK” to continue
Salt
Select Regenerant
(Sodium or Potassium)
“OK” to continue
Backwash 1 Minutes
First backwash cycle duration
Preset - 001.0
(0 to 999.9)
“OK” to continue
Salt lbs.
Amount of salt for each regeneration.
Preset - 006.2
(1.0 to 80.0 lbs.)
(0.45 - 36.99 kg)
“OK” to continue
72-96hr Regeneration
Force regeneration setting
(Yes or No)
(see Operating Modes section)
“OK” to continue
Distiller/RO
Yes, if distiller or RO is in use
(Yes or No)
“OK” to continue
Turbine Test
Used for advanced diagnosis
(Yes or No)
“OK” to continue