pg.4
Smart Touch Controller Setup Guide
OR-05/18/15
Quality Water International
®
Smart Touch Controller
Service Settings
To program Service Settings on the controller, tap twice on the screen to bring up the “Main Menu”. Follow the following
steps to set the Smart Touch controller in the Service Settings.
Main Menu
Tap “Service Settings”
Units
Select units of measure
(Metric or English)
“OK” to continue
Password
Enter the password
“OK” to continue
History?
Option to show history
(Yes or No)
(see History in next section)
“OK” to continue
Language
Select the desired language
(English, Français, Español,
Deutsch, Italiano)
“OK” to continue
Total Regenerations
Displays number of regenerations
(For Reference Only)
Value does reset
“OK” to continue
Total Gallons
Displays number of gallons
that has passed through the unit.
(For Reference Only)
Value does reset
“OK” to continue
Note:
The Service Settings must be set before the Customer Settings.
Mode (1-3)
Enter operating mode
(1 to 3)
(see Operating Modes section)
“OK” to continue
Hardness Grains
Enter Hardness test results
(1 to 199 Grains) or
(00000 to 3999 mg/L)
“OK” to continue
Summary of Contents for ST-200
Page 1: ...Quality Water International Smart Touch Controller Setup Guide Version 1 0 ...
Page 10: ...pg 10 Smart Touch Controller Setup Guide OR 05 18 15 Quality Water International Notes Notes ...
Page 11: ...OR 05 18 15 Smart Touch Controller Setup Guide pg 11 Quality Water International Notes Notes ...