Hagie STS14, Operator'S Manual

Page: 77 / 127

V.
CALIBRATION
B. PROGRAMMING THE RAVEN CONSOLE
5.7
THIS IS JUST A GUIDE TO GET STARTED! REFER TO THE RAVEN INSTALLATION
AND OPERATION MANUAL FOR MORE INFORMATION AND TROUBLE SHOOTING.
Depress the to
enter the
BOOM CAL number.
BOOM
CAL
3
After depressing the key, the key and
the key will allow you to scroll through the
different boom numbers.
To determine the BOOM CAL number, you will
need to know how the boom is divided (the number of
valves and what they control), the spacing option in-
stalled, and the number of nozzles per section.
The diagram below shows a dry boom option. (See
the next page for a wet boom option diagram. )
The boom is numbered from left to right which is
your “BOOM #” and corresponds with the BOOM
SPRAY SECTION switches on the console.
To get the BOOM CAL number, multiply the num-
ber of nozzle tips by the spacing in inches.
BOOM
CAL
3
1
2
60/80/90 foot boom system
with all extensions folded
out.
90 feet
Boom #1
Boom #2 Boom #3
Boom #4
Boom #5
EXAMPLE:
BOOM #1= nozzle tips X spac-
ing in inches 180= 12 X 15. The BOOM CAL
for BOOM #1 is 180.
Center
Boom #4 Boom #3 Boom #5
Center
Boom #1 Boom #2 Boom #3
15” DRY BOOM SPACING