4
Remove existing tank, pressure, left, and right
lines from orbital.
Install #6 JIC run tees onto tank, left, and right
ports.
Re-attach original tank, left, and right hoses to
run end of tee.
NOTE: Ports are labeled on orbital.
Attach supplied tank, left, and right steer hoses
to previously installed run tees. Use 90
o
fitting
end.
Attach provided “excess flow” hose to pressure
port on orbital.
Route hoses back to hydraulic block.
INSTALLING TANK, EXCESS FLOW, LEFT AND RIGHT STEER LINES
Tank
Pressure
Right
Summary of Contents for SmarTrax 2100 Series
Page 10: ......
