Hägglunds Compact CA, Installation And Maintenance Manual

Page: 52 / 56

52
Installation and Maintenance Manual, Compact CA
Declaration of incorporation
6 Declaration of incorporation
The DECLARATION OF INCORPORATION above, is available on request for deliveries from
Hägglunds Drives AB. Translations into other languages are also available.
Example of the Declaration of Incorporation given by Hägglunds Drives AB
Declaration of Incorporation of partly completed machinery
As defi ned by the EC Machinery Directive 2006/42/EC, Appendix II B
The manufacturer
Hägglunds Drives AB
hereby declares that the partly completed machinery
The partly completed machinery may only be put into operation when it has been
established that the machine into which the partly completed machinery is to be
incorporated conforms to the provisions of EC Machinery Directive 2006/42/EC,
where relevant according to this directive.
The requirements are fulfi lled provided that the data in the product documentation (fi tting instructions, operat-
ing instructions, project management and confi guration documents) are implemented by the product user. The
requirements of Appendix I to Machinery Directive 2006/42/EC not mentioned here are not applied and have
no relevance for the product.
The individual below is authorized to compile the relevant technical fi les:
Name:
Björn Leidelöf
Address: Hägglunds Drives AB, S-890 42 Mellansel
Mellansel, 2009-12-29
General principle no. 1.
1.1.3 1.1.5 1.3.1 1.3.2 1.3.3 1.3.4 1.3.6 1.3.7 1.5.3 1.5.4
1.5.5 1.5.6 1.5.8 1.5.13 1.6.1 1.6.3 1.7.3 1.7.4
Name: Compact CA
Function: Hydraulic motor
Model: Compact
Type: CA
Trade name: Compact CA
satisfi es the following essential requirements of Machinery Directive 2006/42/EC in
accordance with the chapter numbers in Appendix I:
It is also declared that the special technical documents for this partly completed
machinery have been compiled in accordance with Appendix VII, Part B. These are trans-
ferred on request to the market surveillance body in paper-based/electronic format.
Conformity with the provisions of further EU Directives, Standards or Specifi cations:
SS-EN 982
SS-EN ISO 12100-1
SS-EN ISO 12100-2
We reserve the right to make changes to the content of the Declaration of Incorporation. Current issue on request.