HagUsb USB to S/PDIF Kit Manual
5
3 Assembly & Test
Circuit Board
Assemble in the following order, solder and clip leads before continuing.
Install all resistors.
Install small capacitors.
Install ferrite bead.
Install crystal.
Install transformer. Insure pin 1 dot is rotated correctly.
Install headphone, RCA, and USB jacks. The headphone jack has one extra pin,
clip it off.
Install electrolytic capacitors. Negative lead towards outside.
Install LED with about 3/8” lead length. Bend it over to face outwards. Square
hole is positive (anode).
HagUsb circuit board.
Summary of Contents for HagUsb
Page 1: ...HAGERMAN T E C H N O L O G Y HagUsb USB to S PDIF Converter...
Page 10: ......