Hagerman Audio Labs UFO StrobeClamp, Manual

Page: 4 / 8

UFO Strobeclamp 4
Operation
The UFO is simple to use, just place on the record spindle. Strobe modes are
sequenced as follows: OFF – 33.3 – 3.33 – 45 – 4.5 – OFF. The 1/10
th
frequency
modes freeze the LEDs in space. The normal modes require viewing the strobe
pattern on the bottom disc.
Batteries
To replace the three AAA batteries, remove the top cover (3 screws), and then
carefully lift out the circuit board assembly. Be careful not to bend any of the LED
wires! Install the new batteries, and place the assembly back into the housing. Make
sure mounting holes and LEDs are properly lined up. Apply the top cover.