RTN100X
Calling functions
8
Subject to technical changes
www.hager.com
Making a switchboard call
Direct dialling of the phone num-
ber defined under switchboard-call
Pressing the yellow "i" key on the direct-dial keypad module connects the switchboard call defined in the call destinations.
This function can be used to define a central information point for visitors.
Calling:
=> [116]
Please wait...
>>>>>>>>>
Display with display call module connected (not needed to execute the function).
The phone number stored after phone number index 116 will be called.
Entering short dial numbers
The short dial function can be use to dial call destination entries
directly.
Attention:
The first short dial number is at 00 and refers
to call destination entry 001. Speed dial 99 = index 100.
Start entering short dial
number
00
Enter short dial number and start
dialling
Short dial:
>-- [00..99]
Short dial:
>00 [00..99]
Miller
Display with display call module connected (not needed to execute the function).
Please wait...
>>>>>>>>>
00 =
99 =
Entry of IP addresses to be dialled
Start IP address input
Complete entry and start dialling
If supported by the system and the terminal, dialling can also take place using the IP address.
Use the star button to enter the dot.
192
168
1
1
Enter IP address to dial
Summary of Contents for RTN100X
Page 18: ...18 www hager com...
Page 19: ...19 www hager com...