hager RTN100X, Manual, Page: 7 / 20

RTN100X
Configuration and calling functions
English
Subject to technical changes 7 www.hager.com
Setup in RTN300X/301X IP door speaker module
To operate the direct-dial key-
pad module, the extension in-
terface (EPORT) of the IP door
speaker module must be set to
button
. This option is preset at
the factory.
If the module fails to behave as
expected, the call the Web in-
terface of the IP door speaker
and go to the
Expert Configu-
ration
area.
Under
System
, the
Keypad
option must be set to Button .
Key function overview
Start >>>
Phone number entry
Finish entry of phone num-
ber/code and dial
Start >>>
Code entry
Call >>>
Switchboard call
Start >>>
Speed dial entry
Entering phone numbers
Start entering phone number Complete entry of phone number
and start dialling
The connected direct-dial keypad module can be used to dial any phone numbers. The IP door speaker module acts like a "normal"
telephone for this purpose. Follow this input scheme:
1234567890
Enter number to be dialled
Enter number:
>
Enter number:
>1234567890
Calling:
1234567890
Display with display call module connected (not needed to execute the function).
Please wait...
>>>>>>>>>