hager h3+ HTD210H, User Manual

Page: 20 / 70

20 Technical changes reserved
Connecting and powering the HTD210H Panel display
3.1 Connecting the HTD210H Panel display
1 CIP socket
2 CIP connector of the CIP-Adaptor
3 CIP-Adaptor
4 RJ9 plug of the CIP Adaptor
Step Action
1 Switch the connected Energy MCCB into the “OFF” or “tripped” position.
NOTE
The front cover of the MCCB can only be opened in the “OFF” or “tripped“ position.
2 Open the front cover of the Energy MCCB.
3 Insert the CIP connector of the CIP Adaptor into the CIP socket.
NOTICE
Risk of damaging plug and socket.
- Observe the orientation of the connector.
- Do not force to push the connector into the plug.
4 Lead the cable outside the MCCB.
- Make sure not to pinch the cables.
5 Lead the cable to the HTD210H Panel display.
6 Connect the RJ9 plug of the CIP Adaptor to the socket named “Display” on the back
of the HTD210H Panel display.