Technical characteristics
- Supply: 2 alkaline batteries type LR03, 1.5 V not supplied
(Lifetime about 1 year).
- Temperature setting range: from +5°C to +30°C
- Transmission frequency: 433.92 MHz
- Static differential: <0.5 K
- Regulation mode: PID
- Transmission distance: 100 m in clear field
- Dimensions: 120 x 80 x 35
- Operating temperature: 0°C to 40C
- Storage temperature: -20C to +6°C
- Relative humidity: 90% max at 25°C
- Insulation class: III
- IP: 31
- IK: 03
Putting in the batteries
1
Lower the battery access cover
(5),
2
Insert two LR03 1.5V batteries as shown in
the diagram drawn in the bottom of the
product, ensuring correct polarity,
3
Close the battery access cover
(5).
Functional description
●
Temperature setting
Use dial
(1) to set the desired comfort
temperature.
Note:
Each time the appliance is switched
ON or OFF the operating signal light
(3)
lights
ON:
1 flash
OFF: 2 flashes
Coding the transmitter with
the receiver
1.
Press the press button
(1) of the
receiver for more than 3 seconds.
- The product moves into
“Configuration” mode , the signal light
“OK”
(2) flashes slowly.
2.
Press the MEMO button of the trans-
mitter for at least three seconds.
- The signal light « OK »
(2) stops
flashing, showing that he transmis-
sion/reception link has been
established.
- The receiver returns to the auto
mode.
Deleting the coding
1.
Press the push-button
(1) for more than
10 seconds
- The signal light « OK »
(2) flashes
slowly, then more quickly.
2.
Press the push-button
(1) of the
receiver again, for more than
3 seconds.
- The signal light « OK »
(2) stops flashing, all codes have been
cleared.
+
1
3
20
25
30
C
°
5
10
15
+
+
20
25
30
C
°
5
10
15
+
+
5
Usable everywhere in Europe
Declaration of conformity:
We, Flash SAS, 33 rue Saint-Nicolas 67704 Saverne Cedex, declare
on our own sole responsibility that the products of the present instruc-
tion sheet satisfy all the essential requirements linked with the direc-
tive R&TTA 1999/5/EC of March 1999.
The SA Controle Quality Manager / 04.03
Usable in all Europe
å
and in Switzerland
Hager Controls hereby declares that the Wireless room thermostat with radio
transmission device complies with the essential requirements and other
relevant provisions of Directive 2014/53/EU.
The CE declaration is available on the www.hagergroup.com site.
www.hagergroup.com
Correct Disposal of this product (Waste Electrical & Electronic Equip-
ment).
(Applicable in the European Union and other European countries with
separate collection systems).
This marking shown on the waste or its literature indicates that it should not be dis-
posed with other household wasted at the end of its working life. To prevent pos-
sible harm to the environment or human health from uncontrolled waste disposal,
please separate this product from other types of wastes and recycle it responsibly
to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this pro-
duct, or their local government office, for details of where and how they can take
this device for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes of disposal.
Supply 2 alkaline batteries type LR03, 1.5 V not supplied
(Lifetime about 1 year).
Temperature setting range
from +5°C to +30°C
Transmission frequency
433.92 MHz
Static differential
<0.5 K
Regulation mode
PID
Transmission distance
100 m in clear field
Dimensions
120 x 80 x 35
Operating temperature
0°C to 40°C
Storage temperature
- 20C to +6°C
Ecodesign class
IV
Relative humidity
90% max at 25°C
IP
31
IK
03
Emission power
10mW
Transmitter duty cycle
10%
Pollution
category
2
Class software
Classe A
Action type
2
Voltage and current declared for the needs of EMC emis-
sions tests:
3V- 0A
Independent panel-mounted control device or for built-in
installation
6LE004101A
4
Technical characteristics
- Supply: 2 alkaline batteries type LR03, 1.5 V not supplied
(Lifetime about 1 year).
- Temperature setting range: from +5°C to +30°C
- Transmission frequency: 433.92 MHz
- Static differential: <0.5 K
- Regulation mode: PID
- Transmission distance: 100 m in clear field
- Dimensions: 120 x 80 x 35
- Operating temperature: 0°C to 40C
- Storage temperature: -20C to +6°C
- Relative humidity: 90% max at 25°C
- Insulation class: III
- IP: 31
- IK: 03
Putting in the batteries
1
Lower the battery access cover
(5),
2
Insert two LR03 1.5V batteries as shown in
the diagram drawn in the bottom of the
product, ensuring correct polarity,
3
Close the battery access cover
(5).
Functional description
●
Temperature setting
Use dial
(1) to set the desired comfort
temperature.
Note:
Each time the appliance is switched
ON or OFF the operating signal light
(3)
lights
ON:
1 flash
OFF: 2 flashes
Coding the transmitter with
the receiver
1.
Press the press button
(1) of the
receiver for more than 3 seconds.
- The product moves into
“Configuration” mode , the signal light
“OK”
(2) flashes slowly.
2.
Press the MEMO button of the trans-
mitter for at least three seconds.
- The signal light « OK »
(2) stops
flashing, showing that he transmis-
sion/reception link has been
established.
- The receiver returns to the auto
mode.
Deleting the coding
1.
Press the push-button
(1) for more than
10 seconds
- The signal light « OK »
(2) flashes
slowly, then more quickly.
2.
Press the push-button
(1) of the
receiver again, for more than
3 seconds.
- The signal light « OK »
(2) stops flashing, all codes have been
cleared.
+
1
3
20
25
30
C
°
5
10
15
+
+
20
25
30
C
°
5
10
15
+
+
5
Usable everywhere in Europe
Declaration of conformity:
We, Flash SAS, 33 rue Saint-Nicolas 67704 Saverne Cedex, declare
on our own sole responsibility that the products of the present instruc-
tion sheet satisfy all the essential requirements linked with the direc-
tive R&TTA 1999/5/EC of March 1999.
The SA Controle Quality Manager / 04.03
