background image

www.hafler.com

Hafler P3100

 User Guide - Part #: R870 1315 00  / 11-2017

Copyright 2017 Hafler All rights reserved. 

Specifications and appearance subject to change without notice. 

THREE YEAR TRANSFERABLE LIMITED WARRANTY

HAFLER (A division of Radial Engineering Ltd.) (“Hafler”) warrants this product to be free from defects 

in material and workmanship and will remedy any such defects free of charge according to the terms 

of this warranty. Hafler will repair or replace (at its option) any defective component(s) of this product 

(excluding finish and wear and tear on components under normal use) for a period of three (3) years 

from the original date of purchase. In the event that a particular product is no longer available, Hafler 

reserves the right to replace the product with a similar product of equal or greater value. In the unlikely 

event that a defect is uncovered, please call 604-942-1001 or email [email protected] to obtain a RA 

number (Return Authorization number) before the 3 year warranty period expires. The product must be 

returned prepaid in the original shipping container (or equivalent) to Hafler or to an authorized Hafler 

repair centre and you must assume the risk of loss or damage. A copy of the original invoice showing 

date of purchase and the dealer name must accompany any request for work to be performed under this 

limited and transferable warranty. This warranty shall not apply if the product has been damaged due 

to abuse, misuse, misapplication, accident or as a result of service or modification by any other than an 

authorized Hafler repair center.

THERE ARE NO EXPRESSED WARRANTIES OTHER THAN THOSE ON THE FACE HEREOF AND 

DESCRIBED ABOVE. NO WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT 

LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 

PURPOSE SHALL EXTEND BEYOND THE RESPECTIVE WARRANTY PERIOD DESCRIBED ABOVE OF 

THREE YEARS. HAFLER SHALL NOT BE RESPONSIBLE OR LIABLE FOR ANY SPECIAL, INCIDENTAL 

OR CONSEQUENTIAL DAMAGES OR LOSS ARISING FROM THE USE OF THIS PRODUCT.  THIS WAR-

RANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH 

MAY VARY DEPENDING ON WHERE YOU LIVE AND WHERE THE PRODUCT WAS PURCHASED.

Summary of Contents for P3100





















Reviews: