HDE
10/
201
6
6
Mortise
• The mortise must be present, and must comply with the dimensioned drawing
on
Suitable profile cylinder for emergency opening
• The profile cylinder for emergency opening is not included in the scope of
delivery and must be ordered separately by the operator.
• The size of the profile cylinder depends on the door leaf thickness.
• For help in calculating the length, see “
“ on
3. Check scope of delivery
• Check completeness and condition of scope of delivery prior to installation.
• If parts are missing or damaged, contact the manufacturer.
• Dispose of packaging materials in accordance with national regulations.
4. Installation
4.1 Safety instructions
for installation
NOTE
The product may be damaged if the profile cylinder is used in-
correctly!
The profile cylinder is for emergency opening only.
> Do not use the profile cylinder for normal door
locking / opening!
WARNING
Risk of suffocation from small parts and packing materials!
Screws, small parts and packing materials can be deadly playthings for
children.
> Do not leave the packing materials and the contents lying
around carelessly, and keep away from children and babies.
> Keep children away from the installation site during installation.
For overview of scope of delivery, see illustrations starting
on
WARNING
Risk of fatality due to lack of emergency opening facility!
If the product is installed without an emergency opening facility, it may
not be possible to open the door from the outside in the event of fault.
If emergencies occur inside the room during the fault, rescue work will
be hindered.
> The operator must ensure that doors to which this product is
fitted have an emergency opening facility in the event of faults.
> Häfele is not liable for damage that is attributable to failure to
install an emergency opening facility.
Summary of Contents for dialock DT 100
