Mounting instructions
engl.
17
Areas of application
The Dialock central locking device (CL) is, within the Basic Solution and
in stand alone mode, applied as follows:
l
suitable for applications where the locking units have to be controlled
individually
l
for smaller systems (recommended for max. 8 CL lock cases)
Please contact your Dialock sales office in case another operation
mode shall be chosen.
The CL terminal is suitable for flush fitted or surface installation.
Supplied with
The CL terminal is supplied with the following items:
Reader module
l
an approx. 2.5 m long round flat-section cable including connector
for connection to the control electronics module
l
Front foil to stick onto the reader module
l
Spacer plate for surface installation of the reader module
Control electronics module
l
Screwed connections for the control electronics module casing
l
Screwed PG-9 connections to connect the flat-section cable to the
control electronics module
l
Connecting tool for connection of cables to the control electronics
module
l
Spare connector for the flat-section cable
Output extender
l
with 0.5 m connecting cable to the control electronics module
Note:
Cascading cable for connection of additional output extenders
must be ordered separately.