1
2
3
5
4
Slide the door brackets (J) & (K) into
frame (D). J is kinked and should be
inserted into the top of the frame. K
should be inserted into the bottom of the
frame, tighten the 4 x M6 x 25 mm
pozi bolts to hold the brackets in
position.
9
Fix the swing bracket (L)
to frame (C) using 2 x 4
x 10 mm allen bolts.
10
J
K
Take top plate (B) and fix to the cabinet side using the rear most hole on the top plate, with the
corresponding pilot hole on the cabinet with 1 x Euroscrew
fig. 1
. Lift the front edge
of top plate (B)
fig. 2
so that the assembled frame can be lowered into position, allowing the
bottom end cap on frame (C)
fig. 3
to locate with the pin on base plate (A), ensuring that the
roller guide assembly locates into the guide channel on base plate (A)
fig. 4.
Lower top plate
(B) so that the pin locates into the hole on the top end cap of frame (C)
fig. 5.
11
Sales and Technical Support -
Tel: 0800 171 2908, Fax: 01788 544440, E-Mail: [email protected], www.hafele.co.uk
