Secure top plate (B) into position using 4 x Euro screws
in the remaining fixing holes and fully tighten all 5 screws.
12
Please note:
Frame (N) is narrower than the one illustrated
above for this 800 mm version.
Fix the roller (M) to rear frame assembly (N) using
1 x M5 x 12 mm allen bolt.
13
Position top rear frame (O) so that it lies flush with top
plate (B) as shown above, pre drill 4 x 2 mm pilot holes.
(DO NOT INSTALL AT THIS POINT)
14
Fix the runner (P) to rear frame assembly (N) using
2 x M4 x 10 mm allen bolts.
15
2 mm
IMPORTANT PLEASE ENSURE:
The top rear frame must be level and parallel with the
cabinet base.
The
rear
of the top rear frame (O) must be fixed so it is
flush with the
rear
of top plate (B) for the fully assembled
unit to function correctly. please ensure a spirit level is
used for this task.
Frame O
Top plate B
Frame O
Top plate B
Sales and Technical Support -
Tel: 0800 171 2908, Fax: 01788 544440, E-Mail: [email protected], www.hafele.co.uk
