17
OPERATION
ON/OFF Cooking Zone
Switching Off a single cooking zone:
Power Stages
In case of On-state of the TC a cooking zone may be selected by touching the dedicated
display (Select-Sensors “8”). The respective display changes to a steady display dot and
“0“ instead of “H“ • in case of a hot cooking zone-. On all other cooking zone displays the
dot expires.
That followed a cooking level may be set by using the Slider area. Thus switches the re-
spective cooking zone on. End stops are •9“ (right side) and •0“ (left side).
First place the pan in the chosen cooking zone. If the pan is not present, the system cannot
be switched on the correspondent zone.
A single cooking zone may be switched off by selecting and setting cooking level to [0]. In
case of an optic warning for hot cooking zones [H] this is displayed in alternation with [0]
and the synchronously display dot.
After the TC is switched Off the display remains black respectively [H] is displayed for an
optic warning for hot cooking zone.
Switching Off all cooking zones:
Immediately switching off all cooking zones is always possible by using the ON/OFF key. [H]
possibly appears on all hot cooking zones. All other cooking zone displays remain black.
The power of the cooking zone is adjustable in 9 different stages; the respective stage is
displayed ([1“] to [9]) via LED seven-segment-displays.
In the cooking zone located on the front left, when selecting the power level 9 and after 30
minutes operating, the power will decrease slightly for safety reasons. In case more power
is required, select the boost level (“P”)
