732.28.426
HDE 27.07.21
8/10
en
3. Connect Mesh Remote Control (Standalone Mode)
3.1. What is the Standalone Mode?
The
Standalone-Mode
of the Connect Mesh Remote Control is its optional mode of operation. In this mode the
Remote Control device can be added to a new BLE Mesh network by self provisioning without the Connect Mesh
App. Once the user created a new BLE Mesh network using the Connect Mesh Remote Control, it can further be
used to provision and configure Connect Mesh 6 way distributors in provisioning mode.
3.2. Creating a new Mesh Network
To create a Mesh Network in Standalone mode, all the devices which should be in unprovisioned State (Status LED
should be blinking). If the LED is not blinking, reset the device.
Press both for 4 seconds
[Image 5]
To start the
Provisioner-Mode
of the Connect Mesh Remote Control, press and hold the two channel buttons for
4 seconds. All channel LEDs will be turned on, if the Remote Control is in Provisioner Mode. The Remote Control is
now waiting for further user input.
IMPORTANT
Hold the Remote Control in your hand and do not place it on a solid surface, otherwise the unit will go into power save mode!
