Subject to
alteration
© 2021 by Häfele SE & Co KG
Adolf-Häfele-Str. 1 · D-72202 Nagold www.hafele.com
10/10
en
732.28.426
HDE 27.07.21
3.5. Standalone Mode Channel 7
The remote control has been added an additional 7th channel (in Standalone Mode only!). To reach the 7th channel,
you can click next to the 6th channel or left before the 1st channel.
[Image 7]
All LEDs will be ON and identify the 7th channel.
The 7th channel is controlling all groups at the same time. This means by turning the 7th channel on and off, all con
-
nected lights will turn on and off.
3.6. Remote Control Standalone Mode adding Wall Switch
The Wall Switch will be added when the Remote Control is searching for new devices in the Standalone Mode. This
happens when the Remote Control is searching for Mesh Boxes to be provisioned (with Monochrome-, Multi-White-
or RGB-Lights), as described in section 3.2 of this technical documentation.
Provisioning the Wall Switch using the Standalone Mode of the Remote Control will provision the Wall Switch with the
following described functions:
Group 7
Scene A
Scene B
Scene C
[image 8]
The Wall Switch behaves as group 7 on the Remote Control
Button
Group or Scene
Action
Upper Left
Group 7 (All Lights) On/Off
Toggle On/Off (click) Dimm (long press)
Upper Right
Scene A (of all lights)
Trigger Scene (click) Dimm Group (long press)
Lower Left
Scene B (of all lights)
Trigger Scene (click) Dimm Group (long press)
Lower Right
Scene C (of all lights)
Trigger Scene (click) Dimm Group (long press)
