15
V. Maintenance (Fig.17-19):
If water flow from the showers becomes lessened or does not spray evenly after a period of
usage, it is possibly because dirt or debris blocks the nozzles. Please gently squeeze those
rubber nozzles with fingers as shown in Diagram 17 and clean up the debris. If water flow from
the showers is normal, but lessened when it comes out of the bath spout, it might be dirt or
debris blocks the aerator. Please take the aerator off as shown in Diagram 18 and assmble it
back after cleaning.
If the flow rate becomes lessened or temperature control is imprecise, it is possibly because
water of poor quality blocks the filter of the thermostatic cartridge. Cleaning method should be
taken as followed: First, turn off the main inlet valve. Then pick out the cap by a sharp pointed
tool as shown in Diagram 19. Remove the followings one by one : locking screw, thermostatic
handle, cover plate, stop collar and locking nut. Take out the thermostatic cartridge and clean
its filter part with a brush and vinegar. Then assemble them back accordingly. Pay attention to
keeping the four parts on one line: the slot on the thermostatic cartridge, stop collar, the 38°C
mark on the cover plate and safety button on the thermostatic handle.
14
Summary of Contents for 589.35.005
