Instructions of T- 602C Electric Kettle
1.
Introduction of Functions
On/Off Button (Press it for about 3s to enter heat preservation mode)
The button is used for stopping/starting the kettle. When it is started, it is
defaulted to boil water to 100°C. Four levels of water temperature: 50°C, 70°C, 80°C
and 90°C are available. After selecting the level of water temperature, you can press
the On/Off button to start it. After the kettle starts to work, the color lamp at the
bottom of the kettle will be on and the digital tube will display the actual temperature
of water. To stop, you need to press On/Off button and the kettle will enter sleep
mode after the digital tube displays OFF for 2s. When the water temperature reaches
the set one, the kettle will end its work and enter standby mode after the buzzer rings
twice.
50°C, 70°C, 80°C, 90°C and 100°C are available for heat preservation and the
digital tube sparkles the set temperature. After selecting the temperature, you need to
press the On/Off button for about 3s to enter heat preservation mode. Under this
mode, the color lamp at the bottom of the kettle will be on and the digital tube will
display the actual water temperature. To stop, you need to press the On/Off button
and the kettle will enter sleep mode after the digital tube displays OFF for 2s. When
the water temperature reaches the set one, the boiling work of kettle will be ended
and it will automatically enter heat preservation mode (the holding temperature is
consistent with the set temperature of boiling). In heat preservation, the digital tube
will display water temperature in a dynamic way. The kettle will stop its work 2
hours after heat preservation and enter standby mode after the buzzer rings twice.
Temperature
Reg
Temperature
Regulator -
On/Off + Heat
Preservation
