5
Installation
：
The shaft on the door is aligned with the hole on the base and
inserted at the angle of the above figure.
Disassembly
：
The door opens about 70 degrees, push the push button in the
direction of the arrow, as shown above, then pull the door down to force it apart.
8. Air flow racks
can be used not only for dehydration but also to cook crispy snacks or reheat
items like pizza
9. BBQ Skewer
Great for your kabob recipes, meat fish or veggies, used when making kabobs,
skewer racks fit over shaft and lock in place with set screws
10. Grilled chicken rack
Use for roasts and whole chicken. Force shaft lengthwise through meat and center.
slide forks onto shaft from either end into meat, then lock in place with set Screws.
There are indentations on the shaft for the set screws. You can adjust the screws
closer to the middle if needed but never but never outward towards the ends.
Note: make sure roast or chicken is not too large to rotate freely within the oven.
Maximum Chicken or Roast ,1.2 KG.
11. Fetch the fork
Use to remove cooked roasts and chicken that have been prepared using the
rotisserie or skewer methods. place under rotisserie shaft and lift (left side first)
then gently extract the food
5. door
Can be removed for cleaning
Note: Pick and place as follows
