8
⚫
Make sure limit plate is resting in slot of block. Position fence against shaft and lock fence in position
with fence tilting handle.
⚫
Place a combination square against face of fence and table surface. The fence and table must be at
90° to each other. If not, loosen tilting handle, loosen hex nut and turn shaft with a screw driver until
fence is square. Secure in position by tightening hex nut.
⚫
Use a bevel gauge or protractor to check 45° inward and outward limit stops. The 45° inward stop is
the hex head bolt located beneath the shaft. The 45°outward stop is located at the top of the fence. If
adjustment is needed, loosen hex nut, turn hex head bolt to proper position and secure in place with
hex nut.
INSTALLING THE BLADE GUARD
Attach the blade guard assembly onto the shaft beside the outfeed table. Fix the blade guard assembly
with the knob.
## Blade guard assembly must be assembled on machine at all times ##
Limit plate
Block
Hex nut
Shaft
Shaft
45
°
Inward stop
Blade Guard Assembly
Knob
Summary of Contents for WoodMaster PJ-6B
Page 15: ...15 EXPLODED VIEW...
