- 6 -
I USAGE
The machine is used for cutting metals and nometals.It’s
suitable to drill,and widely use in the field for
instrument,machining,repairing for cutting a single part or a batch
of parts.
II USE AND MAINTENANCE
(Refer to chart 1.)
1.The user must read the Operation Manualcarefully,know
structure and ability of every handle,the system of transmition and
lubrication well.
2.Before operating ,inspect the normal condition Of the column
lock handle,thespindle sleeve and electric equipments.The ground
line must be connect in the ground.
3.When the position of spindle Box to the working table need
to be adjusted,two clamping
shaft① locating on the right side of Hoist Descend sliding
must be lossed firstly,then turn the hoist descend handle in front
of machine , to hoist or descend the working table to the idea
position,finally clamp the clamping shaft②.
4.A micro feeding institute is applied to the machine ,before
using,pls turn the locking bolt③ in right side to form the handle
Page 7
Instruction Manual for HM-51B (M577)
25/03/2019
