- 12 -
REGULAR OR RAKER SET
:
Cutting
teeth
right
and
left,
alternated
by
a straight
tooth.
Of
general
use
for
materials
with
dimensions
superior
to
5 mm. Used
for
the
cutting
of
steel,
castings
and
hard
nonferrous
materials.
WAVY SET
:
Set
in
smooth
waves.
This
set
is
associated
with
very
fine
teeth
and
it
is
mainly
used for
the
cutting
of
pipes
and
thin
section
bars
(from
1 to
3 mm).
ALTERNATE SET (IN GROUPS)
:
Groups
of
cutting
teeth
right and
left,
alternated
by
a straight
tooth.
This
set
is
associated
with
very
fine
teeth
and
it
is
used
for extremely
thin
materials
(less
than
1mm).
ALTERNATE SET
(INDIVIDUAL
TEETH):
Cutting
teeth
right and left.
This set is used for the cutting of nonferrous soft
materials, plastics and wood.
9 NOISE TESTS
The test was held under environmental noise levels of 65db. Noise measurements with the machine operating
unload was 71db. Noise level during the cutting of mild carbon steel was 73db.
NOTE:
with
the
machine
operating,
the
noise
level
will
vary
according
to
the
different
materials
being
processed.
The
user
must therefore
assess
the
intensity
and
if
necessary
provide
the
operators
with
the
necessary
personal
protection,
as
required
by
Law 277/1991.
13
Instruction Manual for EB-270DSA (B066)
31/03/2016
Summary of Contents for EB-270DSA
