10
OPERATION MANUAL
A
A.
X-Axis Ball Handle:
Manually moves
table along X-axis (left and right).
B.
X-Axis Locks:
Tightens to prevent X-axis
table movement for increased rigidity
during operations where the X-axis
should not move.
C.
Y-Axis Ball Handle:
Manually moves
table along Y-axis (front and back).
D. Knee Crank:
Manually moves table
along Z-axis (up and down).
E. Y-Axis Lock:
Tightens to prevent Y-axis
table movement for increased rigidity
during operations where the Y-axis
should not move.
B
C
D
F. One Shot Oiler:
Lubricates X-, Y-, and
Z-axis table ways.
G. Limit Stop:
Restricts table movement by
its positioning along front of table.
H. Direction Knob:
Selects direction of
table movement. Middle position is
neutral.
I. Speed Dial:
Controls speed of power
feed. Rotating dial clockwise causes the
table to move faster.
J. Rapid Traverse Button:
When pressed,
moves table at full speed when already
in motion.
E
F
I
H
G
J
TABLE IDENTIFICATION
Fig. 3.1
Page 10
Instructions Manual for BM-23A (M595D)
12/02/2018
