8
Assemble the height adjusting hand wheels and angle adjusting hand wheel.
Attach the two lock knobs.
Assemble the extension table with M8 hex head bolts and 8mm flat washers.
Adjust set screws to make tables flush and level. Then tighten the bolts.
Slide four M8X25 hex bolts into the front fence support, then fix the front fence support assembly to the
table by four M8 nuts and four 8mm flat washers.
In the same way, fix the back fence support to the table
M8 hex bolt and 8mm
flat washer
Levelling ruler
Extension table
M8x25 hex bolt
Angle adjusting
hand wheel
Height adjusting
hand wheel
Lock knob
Summary of Contents for SB-12
Page 17: ...17 ...
