manualshive.com logo in svg

Haes ELAN HS-5100, User Manual, Page: 28 / 42

Share
Download
Haes ELAN HS-5100 User Manual Download Page 28

 

Page 28 of 42 

 

3.10.2 Disable 

- 

Outputs 

The Disable Outputs Option enables the isolation of some or all of the outputs. If disabled, the 
outputs will not activate in the event of a fire alarm or other programmed event. 

If the current User ID does not have the necessary permission, the display prompts for entry of a 
password to guard against inadvertent changes.  

[Disable] 
 

 

Enter the password as normal. Once a valid password has been entered, a pop-up window is shown 
on the display to select the type of outputs to disable. Scroll down to view / select the available 
options. The list below details all of the possible options – the available options will have been 
configured by the installation engineer. 

 ALL OUTPUTS 

 

 ALL SOUNDERS                

 ALL BEACONS 
 FIRE ROUTING OUTPUTS 
 FIRE PROTECTION OUTPUTS   

↓

 

 FAULT ROUTING OUTPUTS 
 ALL OTHER RELAY OUTPUTS 
 ONLY SELECTED OUTPUTS 
 PAGERS 

 

3.10.2.1  All Sounder Outputs 

Press the 



 buttons to scroll through and highlight the ALL SOUNDERS Option and then press 

the 

 button to disable them. The display automatically reverts to the Main Disable Menu.  

The ‘Sounder Disabled’ Indicator will be illuminated. 

3.10.2.2 All Beacon Outputs 

Press the 



 buttons to scroll through and highlight the ALL BEACONS Option and then press the 

 button to disable them. The display automatically reverts to the Main Disable Menu.  

NOTE: This only applies to individually addressable beacons. For some combined sounder/beacon 
devices, the beacon follows the operation of the sounder and it is only possible to disable both the 
sounder and the beacon together. 

3.10.2.3  Fire Routing Outputs 

Press the 



 buttons to scroll through and highlight the FIRE ROUTING OUTPUT Option and then 

press the 

 button to disable all fire routing outputs. The display automatically reverts to the Main 

Disable Menu. 

The ‘Fire Routing Disabled’ Indicator will be illuminated. 

3.10.2.4  Fire Protection Outputs 

Press the 



 buttons to scroll through and highlight the FIRE ROUTING OUTPUT Option and then 

press the 

 button to disable all fire protection outputs. The display automatically reverts to the 

Main Disable Menu. 

3.10.2.5  Fault Routing Outputs 

Press the 



 buttons to scroll through and highlight the FAULT ROUTING OUTPUT Option and 

then press the 

 button to disable all fault routing outputs. The display automatically reverts to the 

Main Disable Menu. 

Please Enter Your Password 

www.acornfiresecurity.com

www.acornfiresecurity.com

Summary of Contents for ELAN HS-5100











































Reviews:

No comments