Page 20 of 42
3.8.1 Using
the
Buttons to Navigate Menus
Press the
‘Menu’
button to bring up the display menu.
3.8.1.1
Selecting Menu Options
The Level 2 Menu is shown below:
[Level 2 Menu] User 1 Node 1
VIEW
DISABLE ENABLE
TEST DELAY TOOLS
STATUS
Press the
buttons to highlight the required menu option and then press the
button to
select it.
For example, press the
button followed by the
button to highlight the DELAY option (as shown
below) and then press the
button to select this option.
[Level 2 Menu] User 1 Node 1
VIEW DISABLE ENABLE
TEST
DELAY
TOOLS
STATUS
Press the
‘Esc’
button
from within a menu option to return to the previous menu.
Press the
‘Esc’
button
from the Main Level 2 Menu (shown above) to return to the normal operating
display.
If a button is not pressed for one minute (15-seconds if the panel is in a fire alarm condition) the
display will automatically revert to the normal operating display. Press the
‘Menu’
button to return
directly to the Level 2 Menu display previously shown.
3.8.1.2
Selecting Individual Zone Numbers
When the display is showing a list of Zone Numbers, it is possible to select a specific zone number
by using the number keys. For example, if the display is showing a list of zones:
[ Inputs] More>
Zone Mode Location
0001
Enabled
BASEMENT WEST
0002 Enabled BASEMENT EAST
0008 Enabled GROUND FLOOR
0009 Enabled MAIN RECEPTION AREA
To select a particular Zone, move to the zone number column. The existing zone number will then
be highlighted.
Enter the required Zone Number using the number buttons, for example 12.
[ Inputs] More>
Zone Mode Location
# 12
Enabled BASEMENT WEST
0002 Enabled BASEMENT EAST
0008 Enabled GROUND FLOOR
0009 Enabled MAIN RECEPTION AREA
Finally press the
button to confirm. The display will then show a new list of Zones with the
selected Zone highlighted at the top of the list.
If the number is entered incorrectly, press the
‘Esc’
button.
www.acornfiresecurity.com
www.acornfiresecurity.com