Page 51 of 72
3.3.17.3 Service Number
The Service Number is the telephone number that is shown on the status display whenever a fault
condition is accepted. To change the number, press the
button when the option is highlighted.
The number is entered using the text entry facility; refer to Section
3.1.4
for guidance on how to
enter text.
3.3.17.4 Service Due Date
The next service (over) due date can be entered into the panel memory. When this date is reached,
the panel will enter a fault condition to alert the site operator that a service visit is overdue. To
change the due date, press the
button when the option is highlighted. The display prompts for
entry of the next service date. For example:
[NEXT SERVICE DUE]
TIME =
12:00
DATE = 24/04/12
Use the
buttons to select between the time and date. Use the number buttons to enter the
required time or date.
As soon as a new service date is entered, the panel will cancel any Service Due Fault condition.
3.3.17.5 Trace Logging Mode
The Trace Logging Option determines what type of information and to what level is stored in the
Event Log.
There are three options:
STANDARD
= the normal operating mode logging fire alarm, fault and warning conditions as
they occur.
ST = an extended version of the standard operating mode where the removal of fault
and warning conditions are also logged.
DIAGNOSTIC = a full diagnostic trace of all conditions with greater depth to aid diagnosis of fault
conditions.
To change the option, press the
button.
To erase the event log, press the
button to view the additional command option as follows:
[Setup]
TRACE LOGGING MODE :
Wipe Event Log
DETECTOR BLINKING :
COMPANY LCD LOGO :
PROGRAM ID :
Press the
button and the display will show that the event log is being erased by display the
message “WORKING…” After the event log is erased, the display reverts to the Set-up Options
screen.
3.3.17.6 Detector Blinking
The Detector Blinking option determines whether the LED indicators on the devices will blink
whenever the panel polls the device. To change the operation, press the
button. The display
presents a list of options. For example:
[Setup]
INDIVIDUAL
ALL
NONE
www.acornfiresecurity.com
www.acornfiresecurity.com