Haes ELAN HS-5000 Series, Installation And Programming Manual, Page: 2 / 72

Page 2 of 72
Item Specification Details
HS-5100 HS-5200 HS-5400
Enclosure Steel IP30 Steel IP30 Steel IP30
Dimensions H x W x
D mm 345 x 345 x 85
(/M) 345 x 430 x 120
(/L) 475 x 450 x 120
(/D) 475 x 450 x 190 345 x 430 x 120
(/L) 475 x 450 x 120
(/D) 475 x 450 x 190 475 x 450 x 120
(/D) 475 x 450 x 190
Weight (excluding
batteries) 6Kg
(/M) 8Kg
(/L) 10Kg 8Kg
(/L) 10Kg
(/D) 12Kg 10Kg
(/D) 12Kg
Temperature -5°C to 40°C -5°to 40°C -5°C to 40°C
Humidity (RH) 95 % Max 95 % Max 95 % Max
Cable Entries
(20mm knockouts) 13x top / 8x top rear
(/M) 17x top / 11x top rear / 2
bottom
(/L) 19x top / 11x top rear / 2
bottom
(/D) 30x top / 11x top rear / 3
bottom 17x top / 11x top rear / 2 bottom
(/L) 19x top / 11x top rear / 2
bottom
(/D) 30x top / 11x top rear / 3
bottom 19x top / 11x top rear / 2 bottom
(/D) 30x top / 11x top rear / 3
bottom
AC Supply
(ratings marked on
label inside panel –
see section 2.1 for
location) 200-240V +10%, -15%
47 –63 Hz AC
1.0A max 200-240V, +10%, -15%
47 –63 Hz AC
1.4A max 200-240V, +10%, -15%
47 –63 Hz AC
1.4A max
Battery Capacity
24V 4Ah Internal (min)
24V 7Ah Internal (max)
(/M) 24V 12Ah Internal (max)
(/L) 24V 18Ah Internal (max)
(/D) 24V 24Ah Internal (max) 24V 4Ah Internal (min)
24V 12Ah Internal (max)
(/L) 24V 18Ah Internal (max)
(/D) 24V 45Ah Internal (max) 24V 4Ah Internal (min)
24V 18Ah Internal (max)
(/D) 24V 45Ah Internal (max)
Charging Current 1.0A Temp Compensated 2.0A Temp Compensated 2.0A Temp Compensated
Power Supply On-board 24V DC, 3A High
Efficiency Off-Line Switched
Mode On-board 24V DC, 5A High
Efficiency Off-Line Switched
Mode On-board 24V DC, 5A High
Efficiency Off-Line Switched
Mode
Output Voltage
1
18.0V – 28.0V 18.0V – 28.0V 18.0V – 28.0V
Ripple (Vpkpk)
1.0V 1.0V 1.0V
Max Battery Ohms 1.6 Ω ± 0.1 Ω 0.8 Ω ± 0.1 Ω 0.8 Ω ± 0.1 Ω
Imax(a)/
Imax(b)
2
1.6A
3.0A 2.6A
5.0A 2.6A
5.0A
Number of Fire
Zones 200 max
(2000 when networked) 200 max, across 2 loops
(2000 when networked) 200 max, across 4 loops
(2000 when Networked)
Number of Loops 1 2 1 to 4
Devices per Loop Apollo 126 detector/call points per loop (max)
Hochiki 127 detector/call points per loop (max)
AV 240 detector/call points per loop (max)
Nittan 254 detector/call points per loop (max)
VdS
2095
Clause 6.2.5
Not more than 128
devices per loop
V d S
2095
Not more than 512
devices per panel
or 12000m
2
Loop Current
3
500mA max. 500mA max. per Loop 500mA max. per Loop
Protocols Apollo S90, XP95, Discovery, Explorer and Hochiki ESP or AV or Nittan Evolution
Sounder Outputs
3
2 x 1A Programmable 2 x 1A Programmable 4 x 1A Programmable
Relay Outputs
(Programmable) 2 x1A 30VAC/DC (max)
10mA 5V (min) 2 x 1A 30V AC/DC (max)
10mA. 5V (min) 2 x 1A 30V AC/DC (max)
10mA. 5V (min)
Auxiliary Output
3 4
24V DC, 500mA 24V DC, 500mA 24V DC, 500mA
Display LCD White backlit 240 x 64 Graphical LCD
Programmable
Inputs 8x Switch inputs, 1 x Hard wired input and Four x programmable push buttons c/w slide in labels
USB/RS232 USB B type interface and RS232 for PC connection
Event Log 5000 Event & Diag 500 Fire
As our policy is one of constant product improvement the right is therefore reserved to modify product specifications without prior notice
1
Minimum/maximum specifications for the AUX, and Sounder outputs. Detector Loop voltage is not dependant on AC or battery
voltage.
2
Only applicable if the panel is configured to turn off the charger in alarm. Otherwise, Imax(b)=Imax(a).
3
Total output current from panel not to exceed Imax(b) less internal power consumption.
4
Aux supply tracks a maximum of 0.5V below battery terminal voltage when no mains supply is available.
www.acornfiresecurity.com
www.acornfiresecurity.com