English
Instructions for use
5
Maintenance & Filter Cleaning
WARNING:
–
Always remove the plug before cleaning.
–
Under no circumstances should you immerse the power head lid in water in
order to clean it. Otherwise this might result in an electric shock or fire.
CAUTION:
–
Do not use a wire brush or any abrasive items.
–
Do not use any acidic or abrasive detergents.
Removing and cleaning the filter
1.
Verify that the power cord is disconnected from the outlet.
2.
Release both metal clamps and take off the top cover.
3.
Disconnect the flexible hose turning clockwise and pull.
4.
Gently shake out the ashes from the hose and canister in a suitable dustbin.
5.
Clean the canister with a humid towel, and then wipe it dry with a clean
towel. Do not use cleaning agents.
6.
Turn the filter enclosure [10] counter-clockwise to detach it from the top
cover.
7.
Gently shake out the ashes from the filter enclosure in a suitable dustbin.
8.
Rinse the filter enclosure with fresh water, and then wipe it dry with a clean
towel.
9.
Pull the filter [9] carefully off the top cover.
10.
Gently shake out the ashes from the filter in a suitable dustbin.
11.
Use a soft paintbrush to clean the outside of the filter. Rinse the inside of the
filter with cool water using a gentle stream, and then let it air-dry at room
temperature.
Caution:
o
Do not use warm or hot water to clean the filter. Do not use cleaning
agents, hard brushes, or any other sharp instruments.
o
Do not use any heating devices (such as hair dryers) to dry the filter.
Leave it to dry in the air.
o
Do not clean the filter or filter enclosure in a dishwasher.
Summary of Contents for Fireplace 15L
Page 2: ...6 10 9 2 3 4 1 8 7 5 ...
Page 35: ......