9
Before First Use
Please read through the instructions
carefully before using the unit and
carefully note the safety advice.
Always keep this manual accessible
to any users of the drill.
Area of Application
The control unit can be set up in a
cabinet or can be used as a
portable unit (e.g. in a carry case). It
is suitable for the following scopes:
•
foot care/manicure
(milling, trimming and polishing)
Attention: Additional spray or
suction might have to be in
operation during foot care in your
country.
•
dental technique/dental laboratory
(Milling, trimming and polishing
work at plaster casts and models)
Do not use this unit for dentist
purposes, i.e. working directly
on the patient.
•
industry
(grinding, milling and polishing
works)
Installation Site
The installation of the workroom
must correspond to any regulations
according to your country laws. Set
up the control unit, so that the
ventilation slits are not covered or
blocked, and the exhaust air can
escape well.
The drill and the charging unit may
only be operated in confined
spaces. Temperature rising of the
housing is normal during operation.
Although the unit should never be
covered, nor be located near
heating devices or in direct sun
impact.
