5.52.262.00.01.08
13
6.5
Wire rope deflection
Wire rope pulleys must be installed in a
position centrically to the rope drum.
In order to ensure correct winding up of the
wire rope on the drum, the max. wire rope
deflection angle must not be exceeded.
maximum wire rope deflection angle
4° for standard wire ropes
2° for non-twisting resp. twist-resistant wire
ropes
The minimum dimension (M) from the drum
until the middle of the pulley must be adhered
to.
Illustration 10
NOTICE!
Should the drum be extended and for some models with limit switch, the distance "M" must be increased.
Standard values:
15x 1/2 drum length for standard wire ropes
30x 1/2 drum length for twist-resistant or non-twisting wire ropes
6.5.1
Wire rope pulley (provided by the customer)
table dimension "M" for standard drum length
Capacity
kg
"M" min. at
4 wirerope
deflection
m
2000 4
3200 4,6
4000 4,4
5000 4,6
6300 4,6
8000-20000 4,5
6.6 Tools
Capacity Size
Tool
Use
2000-4000 kg
5000-6300 kg
8000-12500 kg
16000+20000 kg
SW19
SW24
SW32
SW36
Winch fastening
2000-20000 kg
div.
Rope installation
2000-20000 kg
div.
div.
2000-20000 kg
div.
div.
2000-20000 kg
div.
div.
