5.52.179.00.01.09
15
Pendant control
– 4 push buttons
1 Emergency stop
2 Selection switch (as option)
3 Lifting (slow - fast)
4 Lowering (slow - fast)
5 Trolley travel right side (slow - fast)
6 Trolley travel left side (slow - fast)
Illustration 6
Radio control
1 Lowering (slow - fast)
2 Lifting (slow - fast)
3 Trolley travel left side (slow - fast)
4 Trolley travel right side (slow - fast)
5 Crane travel south (slow - fast)
6 Crane travel north (slow - fast)
7 no function
8 no function
9 start
10 start
11 emergency stop
Illustration 7
Push button functions
Relieved push button = stand still
push button half pushed = slow speed
push button pushed completely = fast speed
Illustration 8
Red Emergency-Stop button
button pushed = stand still
turn the button clockwise = free functions
Illustration 9
CAUTION!
Run in of chain into the chain container for hoist with double lifting mechanism
For a correct run in of chain into both chain containers, the lowering operation must be carried out, without
load, at certain intervals, until both chain container are empty.
For motorized devices with operating limit switches "lowering"
Lower until the operating limit switch is released.
Non-observance can lead to device damages!
8
Operation
The following, important points must be observed when operating the equipment:
Read the safety instructions.
Never load the devices beyond their working load limit.
When changing the motor turning direction, allow the motor to come to a standstill first.
The prescribed maintenance intervals must be adhered to.
Observe the duty cycle, i.e. intermittent operation S4-40% ED (as per VDE 0530) means that in a period
of 10 minutes the motor can operate
– no matter the height of the load – for 4 minutes. It is therefore
