HADEF 29/06AP-EX, Installation, Operating And Maintenance Instructions

Page: 29 / 31

5.52.181.01.01.07 29
14.7 Pneumatic motor
The pneumatic motor must be lubricated continuously by a maintenance unit.
If not otherwise agreed, the maintenance unit must be installed by the customer.
Should a maintenance unit be part of the consignment, the oiler must be filled with oil before the first start.
After longer periods of standstill, gummy oil or slight rust may lead to the fact that the motors do not start at
once or do not perform well. In most cases, this problem can be resolved by adding a few cubic meters of
cleaning oil or paraffin into the supply hose and carrying out a test run. Afterwards, fill the same quantity of
oil into the hose and repeat the procedure to ensure that the oil is well distributed. The lubrication is then
carried out by the oiler of the maintenance unit.
Recommendation:
Should longer periods of standstill be foreseen, insert some cm³ of oil into the air supply hose after the last
use of the unit and let the motor run shortly. This will prevent corrosion.
Lubricant: FUCHS Renolin B10 or a similar product.
Use Recommendation Interval
Maintenance unit
FUCHS
RENOLIN B10
0,1l 1 month
14.8 Lubricant selection
FUCHS SHELL ESSO ARAL MOBIL TOTAL CASTROL KLÜBER
Renolin PG 220 Tivela S 20 Glycolube 220 Degol GS 220 Glygoyle 30 CARTER SY 220 -- Klübersynth GH 6-220
Renolin PG 320 Tivela S 320 Glygolube 320 Degol GS 320 Glygoyle 320 -- -- Klübersynth GH 6-320
Renolin PG 460 Tivela S 460 Glygolube 460 Degol GS 460 Glygoyle 460 -- Alphasyn PG 460 Klübersynth GH 6-460
Renolit FEP2 Alvania EP2 Unirex EP2 -- Mobilux EP2 MULTIS EP2 -- --
Renolin B10 VG32 Tellus Oil 32 -- -- -- -- -- --
Stabylan 5006 -- -- -- -- -- Optimol Viscoleb 1500 Klüberoil 4UH 1-1500
Chain lubricant OKS 451
14.9 Lubricant for food industry
– selection (as option*)
FUCHS SHELL MOBIL CASTROL KLÜBER
Gear Geralyn SF 220 Cassida Fluid GL 220 Glygoyle 220 Optimol GT 220
Klübersynth
UH1 6-220
Driving gear Geralyn SF 320 Cassida Fluid GL 220 Glygoyle 320 Optimol GT 320
Klübersynth
UH1 6-320
Load chain -- -- Lubricant FM 100 Optimol Viscoleb 1500 --
Load hook
Pulley
Spur gear
Pinion
-- FM Grease HD 2 Mobilegrease FM 222 -- --
* must be mentioned by order
15 Trouble
DANGER!
Assembly, disassembly and maintenance operations must only be carried out in an atmosphere not
prone to explosion!
Please pay attention to the following in case of problems:

Troubles with the equipment must only be repaired by qualified personnel.

Secure the unit against unintended operation start.

Put up a warning note indicating that the unit is not to be used.
Use Recommendation Interval
Pneumatic motor
FUCHS
RENOLIN B10
0,1l 3 Monate