42
SECTION 4,
continued
4.2
Recalling Stored Data
1. To recall stored data, press the
RECALL
key while in the
Reading mode. The screen will display the most recently
saved or recalled measurement data.
2. Use the arrow keys to scroll to the desired storage location.
Press
RECALL
again to allow number entry of a storage
location. The question mark will flash. Enter the number of
the desired storage location. Press
ENTER
to accept the
storage location or
EXIT
to escape.
3. To display the mV value of the reading, press the
pH/mV
or
ISE/mV
key.
4. To review the time of the calibration, press
TIME
once. To
review the date of the calibration, press
TIME
twice. Press
EXIT
to return the reading value.
5. When recalling is complete, press
EXIT
to return to the
Reading mode.
4.3
Erasing Data
4.3.1
Erasing Single Data Points
1. To erase data, it must be recalled first. Press the
RECALL
key
while in the Reading mode. See Section 4.2 for
more information.
2. When the desired data point is displayed, press
ERASE
.
3. The meter will display
Erase Sample #
and a flashing
?
. Press
ENTER
to erase the data. The data will disappear.
4. The meter will recall the most recently stored or recalled.
There are three options at this point:
•
Press
ERASE,
then
ENTER,
to erase the displayed data.
•
Press
EXIT
to exit Recall mode.
•
Press an arrow key to scroll to other data points.
5. Repeat steps 2-3 for each data point that needs to be deleted.
