Hach sc1000, User Manual

Page: 11 / 64

11
Installation
3.2 Mounting the Controller
The optional sun-shield is highly recommended for all outdoor installation. Refer to the
instruction sheet supplied with the sun shield for installation instructions.
3.2.1 Wall Mounting the Controller
Leave a minimum of 5 cm (2 in.) of space at the top and sides for cooling purposes and
display module installation. Leave a minimum of 15 cm (6 inches) of space underneath for
the cable connections. Refer to
Figure 3 for proper wall mounting dimensions.
1. Install the four supplied bolts into the wall.
2. Hang the sc1000 controller system over the bolts and attach the supplied washers
and hand-tighten the two bottom bolts.
Figure 3 sc1000 Controller Mounting Features
3.2.2 Horizontal and Vertical Pipe Mounting
Refer to Figure 4 and Figure 5 on page 12 for mounting descriptions. For more information
on pipe mounting refer to the instructions supplied with the mounting kit.
315 mm (12.28 inches)
255 mm (9.94 inches)
254 mm (10.00 inches)
80 mm
(3.16 inches)
203 mm (8.00 inches)
80 mm
(3.16 inches)
6.7 mm
( 0.26 inches) (4)
M6 x 12.5 mm
(M6 x 0.5 inches)
50 mm (2.0 inches)
minimum clearance
客服：400 688 9809
网址：www.mamots.com 电话：0431-85178766