Hach QbD1200+, Manual, Page: 18 / 128

7.3 Data management
7.3.1 Select a report
The instrument saves measurement, calibration, system health analyses, system suitability tests,
error logs, background statistics and audit record data reports. Use the steps that follow to read or
export a report.
1. Push Reports and Data .
2. Select a report from the list, then push for output options.
Option Description
Filter Results Selects the data range to sort by date and/or by operator.
Select a
format Selects the report template output format (PDF, CSV or XML).
Output Selects the output device: printer, export to USB, paperless export or show on
the display.
To get the report via printer, make sure a printer is connected to the
instrument. Refer to
Configure the peripheral settings on page 16. When
prompted, push Print .
To output a report via a USB port, connect a USB flash drive. When prompted,
push
Start .
7.4 Do a qualifications procedure
C A U T I O N
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the
personal protective equipment appropriate to the chemicals that are handled. Refer to
the current safety data sheets (MSDS/SDS) for safety protocols.
Collect the necessary items before a qualification procedure starts. Do these procedures that follow
periodically or as required by regulatory agencies.
1. Push Qualifications .
2. Select an option.
Option Description
Calibration Shows the instructions on the display about how to prepare the reagent and the
standards.
SST500 Shows the instructions on the display about how to prepare the reagent and the
standards.
Background Shows the instructions on the display about how to prepare the reagent.
SDBS Shows the instructions on the display about how to prepare the reagent and the
standards.
SST8000 Shows the instructions on the display about how to prepare the reagent and the
standards.
Accuracy Shows the instructions on the display about how to prepare the reagent and the
standards.
3. Enter the lot identification number (Lot ID) and the expiration date for the standards.
2
4. Push to start the procedure.
2
This step does not apply to the background test.
18 English