Hach QbD1200+, Manual, Page: 17 / 128

7.2 Measurement
7.2.1 Do a measurement
1. Push Perform Measurement .
2. Select an option.
Option Description
Create New Tray Makes a new sample tray. Refer to Make a sample tray
template on page 17.
Load Tray From File Imports trays from a USB flash drive that has sample tray
parameters set.
Manual Measurement Sets up a manual measurement of one specified sample. Enter
the sample ID and the quantity of samples to replicate.
Select a Pre-Configured
Tray from List Selects a sample tray that is saved in the system to measure.
3. Read the parameters of the selected tray, then make the necessary changes.
4. Push to start the measurement.
7.2.2 Make a sample tray template
1. Push Perform Measurement > Create New Tray .
2. Select the tray options. Push to go to the next screen.
Option Description
How many samples Sets the quantity of sample locations. When a sample location is
selected for measurement, each sample location is identified with a blue
circle.
How many reps Sets the quantity of sample replicates to measure (1 to 5).
Sample ID label Select how to identify each sample: individually, by an automatic sample
ID with the tray position with time stamps or with the sample ID builder.
Review & Confirm Read the parameters of the tray. If necessary, make changes to the tray.
3. Push Save to continue.
4. Enter a name for the tray template.
5. Push Save Tray to save the tray template.
6. Select "Make Default" to make this the default tray template.
7. Push to start the measurement.
If the samples are not prepared for the procedure, push
Home .
English 17