Figure 4 Display overview
1
Calibration icon
4
Battery icon
7
Calibration standard(s) expected
2
2
Lock icon
5
Parameter value
8
Temperature
3
Parameter
6
Calibration standard(s) measured for
last calibration (low, medium, high)
Table 1 Display icons
Icon Description
Shows the battery power level. Flashes when the battery power is less than 10%.
Shows when the lock feature is on. When the lock feature is on, the parameter value on the display does not change.
Push to set the lock feature to on or off.
Shows when the tester is in calibration mode or when a calibration is due. If "?" shows next to the calibration icon, the
last calibration was not successful.
Keypad description
gives the key descriptions.
Figure 5 Keypad overview
1
Power key
2
Calibration/Settings key
3
Lock key
2
Shows during calibration
6
