Hach Pocket Pro CondLR, User Manual

Page: 5 / 10

Figure 2 Product components
1 Pocket Pro tester 3 Lanyard
2 AAA alkaline batteries (4x) 4 SINGLET
™
(LR: 1413 µS/cm; HR: 12.88 mS/cm)
Install the batteries
C A U T I O N
Explosion hazard. Incorrect battery installation can cause the release of explosive gases.
Be sure that the batteries are of the same approved chemical type and are inserted in the
correct orientation. Do not mix new and used batteries.
W A R N I N G
Fire hazard. Battery substitution is not permitted. Use only alkaline batteries.
Install the four AAA alkaline batteries in the tester. Refer to the illustrated steps in
Figure 3 .
Figure 3 Install the batteries
User interface and navigation
Display description
Figure 4 shows the measurements, calibration standard information and indicator icons
shown on the display. Table 1 gives descriptions of the icons.
5