2—5
Instrument Operation,
continued
2.
Press
READ/ENTER
.
The digit to be edited will flash.
3.
Use the
ZERO/SCROLL
key to change the entry, then press
READ/ENTER
to
accept and advance to the next digit. The time is entered in 24-hour format.
Recalling Stored Measurements
1.
Press the
MENU
key, then press the
ZERO/SCROLL
key until the display shows
RCL. The instrument automatically stores the last 10 measurements.
2.
In RCL, press
READ/ENTER
to recall the stored measurements, beginning with
the most recent measurement taken. The meter stores the measurement
number as 01 (most recent) through 10 (oldest), the time the measurement was
taken, and the measurement value. The
ZERO/SCROLL
key allows for selection
of a specific measurement by number. The
READ/ENTER
key scrolls through all
stored data points.
Summary of Contents for POCKET COLORIMETER II
