Hach PHOSPHAX indoor sc, User Manual

Page: 23 / 104

23
Installation
3.4.5 Connect the sample supplies and drain
Before connecting tubing or cables, determine the option number
that corresponds the system configuration. Refer to
Table 1 . Based
on the option number, determine the sealing plug that will be used
to seal the enclosure openings, refer to
Table 2 .
When the option number is determined, refer to Appendix A
Plumbing and connection options on page 63 for installation
information.
Table 1 System configuration options
Location Filtration Drain
Number of
analyzers
Sample
lines
(Ch1, Ch2)
Number of
parameters
1
Option
#
Refer to the following section
for more information:
OUTDOOR
Filter Probe sc Any 1 1 1 1 A.5 on page 66
Filter Probe sc Heated 1 1 1 2 A.6 on page 68
FILTRAX Heated 1 1 1 3 A.7 on page 70
FILTRAX 2 heated 2 1 2 4 A.8 on page 72
2 FILTRAX Heated 1 2 1 5 A.9 on page 74
2 FILTRAX 2 heated 2 2 2 6 A.10 on page 76
INDOOR
Filter Probe sc Unheated 1 1 1 7 A.11 on page 78
FILTRAX Unheated
1 1 1 8 a A.12 on page 80
2 1 2 8 b A.13 on page 82
2 FILTRAX Unheated
1 2 1 9 a A.14 on page 84
2 2 2 9 b A.15 on page 86
Continuous
sample feed
Unheated
1 1 1 10 a A.16 on page 88
2 2 2 10 b A.17 on page 90
2 continuous
sample feeds
Unheated
1 2 1 11 a A.18 on page 92
2 2 2 11 b A.19 on page 94
1
For 2-parameter options, refer to 2-parameter configuration on page 64 .
Table 2 Sealing plug types
Option
Analyzer 1 Analyzer 2
Opening 1 Opening 2 Opening 3 Opening 1 Opening 2 Opening 3
1 Plug 2 Plug 3 Plug 3 — — —
2 Plug 2 Plug 1 Plug 3 — — —
3 Plug 1 Plug 1 Plug 3 — — —
4 Plug 1 Plug 1 Plug 3 Plug 1 Plug 1 Plug 3
5 Plug 1 Plug 1 Plug 1 — — —
6 Plug 1 Plug 1 Plug 1 Plug 1 Plug 1 Plug 3
7 Plug 2 Plug 3 Plug 3 — — —
8 Plug 1 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3
9 Plug 1 Plug 1 Plug 3 Plug 3 Plug 3 Plug 3
10 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3
11 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3 Plug 3