background image

5

General Information

1.3 Product recycling information

ENGLISH

Electrical equipment marked with this symbol may not be disposed of in 
European public disposal systems after 12 August 2005. In conformity with 
European local and national regulations (EU Directive 2002/96/EC), European 
electrical equipment users must now return old or end-of-life equipment to the 
manufacturer for disposal at no charge to the user.

Note:

 For return for recycling, please contact the equipment 

manufacturer or supplier for instructions on how to return end-of-life 
equipment for proper disposal. 

DEUTSCH

Elektrogeräte, die mit diesem Symbol gekennzeichnet sind, dürfen in Europa nach dem 12. 
August 2005 nicht mehr über die öffentliche Abfallentsorgung entsorgt werden. In 
Übereinstimmung mit lokalen und nationalen europäischen Bestimmungen (EU-Richtlinie 
2002/96/EC), müssen Benutzer von Elektrogeräten in Europa ab diesem Zeitpunkt alte bzw. zu 
verschrottende Geräte zur Entsorgung kostenfrei an den Hersteller zurückgeben.

Hinweis:

 Bitte wenden Sie sich an den Hersteller bzw. an den Händler, von dem Sie das Gerät 

bezogen haben, um Informationen zur Rückgabe des Altgeräts zur ordnungsgemäßen 
Entsorgung zu erhalten.

FRANCAIS

A partir du 12 août 2005, il est interdit de mettre au rebut le matériel électrique marqué de ce 
symbole par les voies habituelles de déchetterie publique. Conformément à la réglementation 
européenne (directive UE 2002/96/EC), les utilisateurs de matériel électrique en Europe doivent 
désormais retourner le matériel usé ou périmé au fabricant pour élimination, sans frais pour 
l'utilisateur.

Remarque:

 Veuillez vous adresser au fabricant ou au fournisseur du matériel pour les 

instructions de retour du matériel usé ou périmé aux fins d'élimination conforme.

ITALIANO

Le apparecchiature elettriche con apposto questo simbolo non possono essere smaltite nelle 
discariche pubbliche europee successivamente al 12 agosto 2005. In conformità alle normative 
europee locali e nazionali (Direttiva UE 2002/96/EC), gli utilizzatori europei di apparecchiature 
elettriche devono restituire al produttore le apparecchiature vecchie o a fine vita per lo 
smaltimento senza alcun costo a carico dell’utilizzatore.

Nota:

 Per conoscere le modalità di restituzione delle apparecchiature a fine vita da riciclare, 

contattare il produttore o il fornitore dell’apparecchiatura per un corretto smaltimento.

DANSK

Elektriske apparater, der er mærket med dette symbol, må ikke bortskaffes i europæiske offentlige 
affaldssystemer efter den 12. august 2005. I henhold til europæiske lokale og nationale regler 
(EU-direktiv 2002/96/EF) skal europæiske brugere af elektriske apparater nu returnere gamle eller 
udtjente apparater til producenten med henblik på bortskaffelse uden omkostninger for brugeren.

Bemærk:

 I forbindelse med returnering til genbrug skal du kontakte producenten eller 

leverandøren af apparatet for at få instruktioner om, hvordan udtjente apparater bortskaffes 
korrekt.

Summary of Contents for ORBISPHERE A1100
















































Reviews: